If you’re interested in joining the drone racing craze, you’re probably wondering what you need to get started. The ARRIS FPV250 Mini Racing Drone is just one of many options for getting into the world of FPV miniquad racing. At an attractive price point, the Arris FPV250 (250 sized miniquad) holds an advantage over many other pre-assembled racing drones, but it has some downsides that make it not as beginner friendly as the competition.
Let’s start with the facts for the ARRIS FPV250 Racing Quad
- Costs around $350.
- You’ll need to provide an RC control system, battery, and a video system to get racing.
- The Arris uses small but popular 1806 size motors. These motors don’t provide as much power as their larger 2204/2206 cousins, but do the trick for beginners.
- The Arris is controlled by the CC3D flight control board.
- The Arris offers an ‘Almost Ready to Fly’ (ARF) solution that looks like a true racing drone.
The ARRIS FPV250 RACER is packed full of great features
The good points:
- The ARRIS fpv250 build is very clean with strong materials
- Lower cost than alternative products
- Durable, crash resistant frame
- Traditional racing drone look
- Standard connectors for easy modification
Without a doubt the one factor that makes the Arris fpv250 racer so attractive to consumers looking to get into miniquad racing is the price. The Arris FPV250 Mini Racing Sport is cheaper than most other prefab drone options, including the popular Runner 250 ‘Bind N’ Fly’ option. At that price you’ll receive the Arris FPV250 fully assembled, with everything wired up. In order to complete the build, you’ll need to attach the propellers and install the necessary radio gear, as well as a battery, which are not included.
ARRIS FPV250 Build: 8/10
The Arris is built similar to a home-made racing drone. With a standard miniquad look, the Arris is built using composite materials and metal standoffs. While there have been a few complaints regarding the screws used, the Arris features a clean, strong build that is sure to impress everyone at the flying field.
ARRIS FPV250 Durability: 8/10
One of the other popular factors of the Arris compared to other options is its durability. The Arris fpv250 mini quadcopter frame is made of composite fiberglass. The fiberglass, while not as strong as carbon fiber, is significantly stronger than the plastic construction of the Runner 250, and with the scarcity of replacement parts for these models, durability can be the deciding factor in terms of keeping your drone air- worthy.
ARRIS FPV250 Compatibility: 9/10
One other benefit of the Arris is that it uses standard plugs and wiring. While the drone itself is pre- built, if you ever need to replace or use third- party accessories, the Arris will be able to accommodate any modifications with ease. It uses the popular XT-60 connector type for power, as well as standard servo leads for the control board. For a hardcore miniquad racer, the Arris can be modified as desired, including changing out the flight control board, motors, speed controllers, or camera.
ARRIS FPV250 Drawbacks
The bad points of the ARRIS FPV250 Racing Quad
- The Arris is NOT ‘Ready to Fly’ out of the box, making completion confusing for total beginners
- Some placements on the frame makes certain equipment susceptible during a crash
- ‘Fiberglass composite’ construction makes the frame less durable than pure carbon fiber, but much stronger than the plastic construction of other offerings
ARRIS FPV250 Ease of Completion: 7/10
Perhaps the biggest negative of the Arris is that it doesn’t come as a ‘ready to fly’ out of the box solution. In order to get the Arris in the air, you’ll need to buy a battery, battery charger, video transmitter and receiver, as well as an RC control system. Because of this, setting up the Arris can be confusing and frustrating for beginners who chose the Arris FPV250 250 mini as their very first RC aircraft.
ARRIS FPV250 Equipment Protection: 6/10
Small things like the camera placement make the Arris FPV 250 250 mini somewhat vulnerable to damage in a crash. The camera is not fully protected by the top and bottom plates of the frame, making it susceptible to damage during impact. In addition to the camera placement, the HD action camera mount on top of the frame is likely to fall off and be lost in a crash.
ARRIS FPV250 Materials 8/10
While some miniquads are made from pure Carbon Fiber, the Arris is actually made of a fiberglass composite, which is weaker than true carbon. Even though the Arris isn’t lacking for durability, it won’t hold up as well in a crash as true carbon fiber might.
IS THE ARRIS FPV250 RACER THE BEST FPV RACER FOR YOU?
Overall, the Arris FPV250 scores 7.6/10. At an attractive price point, it offers many benefits over a self-built miniquad, while offering the conveniences of a pre-built frame. Standard connectors and wiring make the Arris easy to modify, and the frame itself is durable enough for racing. The Arris isn’t truly ‘ready to fly’ out of the box, requiring the purchase of additional items to get up in the air. If your happy to look past this, the ARRIS FPV250 is a great choice if you’re an RC hobbyist looking to get into FPV drone racing. Still undecided? Check out our Best FPV Drones Buyer’s Guide HERE
Check out these articles
ARRIS FPV250 Mini Racing Sport Quad
Ease of Completion7/10
Choice of Materials6/10
- - Clean Design, Racing Drone Style
- - Good Value
- - Durable, Crash-resistant Frame
- - Strong Materials
- - Standard connectors for easy modification
- - Mounts on frame susceptible during a crash
- - Fibreglass composite construction is less durable compared to pure carbon fibre